Volkswagen Key Programming Tips
Volkswagen provides a convenient method to add a spare key or replace one that stopped working. The process is simple and cost-effective if you follow some guidelines.
The first step is to find the correct key fob. It should either have the keyblade which can be flipped out or be inside the keyfob. Then, collect all the necessary documentation to verify ownership. Then, go to the locksmith or dealer.
Immobilizer
The immobilizer is a device to stop keys that are damaged, or unauthorized, from beginning the car. The system recognizes a specific chip on each key. VW dealers or automotive locksmiths can program additional keys. However, the process requires a computer and software. The right tools are necessary for a smooth process. Before starting the key programming process technicians should recreate the issue to determine the problem. They should also scan the vehicle for fault codes, check for technical service bulletins (TSBs), and test the battery within the key fob.
A Volkswagen key that has an unprogrammed immobilizer chip will stop the engine after a couple of seconds of cranking. It won't stop the alarm from going off or unlocking doors. The key fob's immobilizer is a separate component glued in the flip portion of the car key. It needs to be programmed into the vehicle's computer in order to work.
It's more expensive add a new VW key than to make an identical key when all the original keys were lost. The key must be purchased from the manufacturer and undergo an exclusive programming process to make it compatible with the car's computer. It can be done with the help of a professional and a software tool like VagTacho or VCDS. This method is advised for vehicles with the older Immobilizer 2, and older.
Electronic Ignition
The electronic ignition feature of a key is a crucial component of a car's anti theft technology. The feature is activated when the key fob is inserted in the ignition. It is not a foolproof system however. It is susceptible to malfunctions, which could result in your VW engine not running. This could be due to a number of causes, including defective key programming or a defective car battery.
You can avoid this issue by having your Volkswagen car key fobs programmed professionally. This can be done through a dealer, or an locksmith. Prices for this service can vary from one to the next, but typically range between $90 and $150. These prices also depend on the vehicle's model and year.
You will need your primary key to program the new VW key fob. The new key must be capable of starting the engine of your vehicle. The onboard diagnostics will recognize it as authentic keys. Then, the immobilizer warning light will turn off.
Certain models require a PIN code ranging from three to four digits, to enable onboard key programming. Some models may require a scanning tool. A locksmith or dealer could use a scanner for programming onboard keys. These tools aren't for sale in general auto accessory stores, so you will need to either purchase one or borrow it from the dealership.
Keyless Entry
If your Volkswagen key fob is having problems with its battery, or you've lost it all together, it's likely that the car will start, but cannot unlock. It's not difficult to fix this issue. The first step is to ensure that the key fob is within the range of the vehicle. If it is, hold the button to lock for six seconds, until the lights flash on the key.
The key fob will now be reset to the nearest point to your VW. You can then unlock the vehicle by pressing the unlock button on the key fob. If the vehicle isn't unlocking after this procedure, you'll have to call the dealer to have the key programmed.
The cost of programming a new Volkswagen Key could be costly. It is recommended to get estimates from a variety of dealers prior to choosing the best one for you. Check if the dealer will charge you for both the key as well as the programming.
volkswagen car key of a second Volkswagen key is a good idea for many reasons. You might need an extra key in case your primary key is lost or stolen. If you have a spare key and wish to program it to ensure it will work with your Volkswagen, here are some simple steps to follow.
Remote Start
In contrast to previous generations of key fobs that communicated with the vehicle using radio waves, Volkswagen's remote start systems connect with your car via a secure wireless connection over cellular technology. This means that your VW Atlas, Jetta, or Passat is able to detect the proximity of your vehicle and enable its features like keyless entry or push button start. It's as easy as opening the app and connecting your phone to your vehicle and pressing the button.
Be certain that your Volkswagen is parked, and that the driver's-side door is shut. This will ensure that only the right key is used to access your vehicle’s features. If the key is not recognized, the dashboard will display an error message. In addition, this option will only work with newer VW models that feature an RFID sensor ring on the steering column. These models require a secret pin is programmed.
Close the driver's side doors and take out the key that is used to program a new keyfob. Then, press the lock button on the new key fob. This will send a signal to the vehicle that the key is a functional key. The key will begin transmitting signals to allow you to unlock the door to your driver's side and start your vehicle remotely. Some have reported that this works only if there is clear sight to the car, but others have succeeded even in congested parking lots.
